# ChainofSecrets.org Launches Quicksync!

**URL:** <https://forum.scrt.network/t/chainofsecrets-org-launches-quicksync/1467>\
**Category:** Secret Nodes\
**Created:** [March 23, 2020, 12:30am UTC](https://forum.scrt.network/t/chainofsecrets-org-launches-quicksync/1467 "2020-03-23T00:30:08Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![dbriggsie](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.scrt.network/dbriggsie/32/587_2.png) [@dbriggsie](https://forum.scrt.network/u/dbriggsie)\
**Post date:** [March 23, 2020, 12:30am UTC](https://forum.scrt.network/t/chainofsecrets-org-launches-quicksync/1467/1 "2020-03-23T00:30:08Z")

</div>

Hi all!

As alot of you may have noticed, when spinning up a fullnode it can take around 3-4hours to completely sync the chain.

Chain of Secrets team has taken on the task to help the community out with offering a Quicksync service, the latest quicksync is available at [http://quicksync.chainofsecrets.org/enigma-1-block992500.tar.lz4](http://quicksync.chainofsecrets.org/enigma-1-block992500.tar.lz4)

We will publish compressed & complete sync’s at different block intervals. The current quicksync is 6.7GB which we have compressed to 3.9GB.

**Here are the steps to use it when setting up a new fullnode**  
_This will save you 3-4hours of wait time_

**Install lz4**

```
sudo apt-get update -y

sudo apt-get install wget liblz4-tool -y

```

**Download & Decompress Quicksync Data after installing Enigmad & Enigmacli**

```
cd ~/.enigmad/

wget http://quicksync.chainofsecrets.org/enigma-1-block992500.tar.lz4

lz4 -d enigma-1-block992500.tar.lz4 | tar xf -

```

Please note, that you may have a short time to catchup to latest block, but this will be minutes not hours.

If you like our contributions, please support us and join our telegram! Come say hi!

> **[Chain of Secrets](https://t.me/chainofsecrets)**
>
> Enigma.co Block Producer & Dapp Development

---

<div class="post-metadata">

**Author:** ![guy](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.scrt.network/guy/32/56_2.png) [@guy](https://forum.scrt.network/u/guy)\
**Post date:** [March 23, 2020, 7:37am UTC](https://forum.scrt.network/t/chainofsecrets-org-launches-quicksync/1467/2 "2020-03-23T07:37:19Z")

</div>

Beautiful initiative!

---

<div class="post-metadata">

**Author:** ![dbriggsie](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.scrt.network/dbriggsie/32/587_2.png) [@dbriggsie](https://forum.scrt.network/u/dbriggsie)\
**Post date:** [March 28, 2020, 1:52pm UTC](https://forum.scrt.network/t/chainofsecrets-org-launches-quicksync/1467/3 "2020-03-28T13:52:30Z")

</div>

Just an update. New quicksync file for block height 649,000

[http://quicksync.chainofsecrets.org/enigma-1-block649000.tar.lz4](http://quicksync.chainofsecrets.org/enigma-1-block649000.tar.lz4)

---

<div class="post-metadata">

**Author:** ![dbriggsie](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.scrt.network/dbriggsie/32/587_2.png) [@dbriggsie](https://forum.scrt.network/u/dbriggsie)\
**Post date:** [April 4, 2020, 5:12pm UTC](https://forum.scrt.network/t/chainofsecrets-org-launches-quicksync/1467/4 "2020-04-04T17:12:13Z")

</div>

Another update. Latest QuickSync is for block height 700,000.

[http://quicksync.chainofsecrets.org/enigma-1-block700000.tar.lz4](http://quicksync.chainofsecrets.org/enigma-1-block700000.tar.lz4)

---

<div class="post-metadata">

**Author:** ![dbriggsie](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.scrt.network/dbriggsie/32/587_2.png) [@dbriggsie](https://forum.scrt.network/u/dbriggsie)\
**Post date:** [April 13, 2020, 2:16am UTC](https://forum.scrt.network/t/chainofsecrets-org-launches-quicksync/1467/5 "2020-04-13T02:16:40Z")

</div>

Latest Quicksync is now at block height 868,000

[http://quicksync.chainofsecrets.org/enigma-1-block868000.tar.lz4](http://quicksync.chainofsecrets.org/enigma-1-block868000.tar.lz4)

---

<div class="post-metadata">

**Author:** ![assafmo](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.scrt.network/assafmo/32/440_2.png) [@assafmo](https://forum.scrt.network/u/assafmo)\
**Post date:** [April 13, 2020, 8:26am UTC](https://forum.scrt.network/t/chainofsecrets-org-launches-quicksync/1467/6 "2020-04-13T08:26:51Z")

</div>

Thanks @dbriggsie!

I’ve just upgraded a validator node from v0.0.1 to v0.03 using Quicksync and it took less than 15 minutes overall.

For future reference:

I backed up the validator’s private key: [https://github.com/enigmampc/EnigmaBlockchain/blob/master/docs/validators-and-full-nodes/backup-a-validator.md](https://github.com/enigmampc/EnigmaBlockchain/blob/master/docs/validators-and-full-nodes/backup-a-validator.md)

Then I used these commands:

```
# the current block was ~872000
# download quicksync at block 868000
# afterward it should take no more than 4-5 minutes to catch up on 4k blocks
wget http://quicksync.chainofsecrets.org/enigma-1-block868000.tar.lz4

# stop v0.0.1 node
sudo systemctl stop enigma-node

# delete all of v0.0.1 block data
enigmad unsafe-reset-all

# remove v0.0.1
sudo dpkg -P enigmachain # might fail but it's okay

# install v0.0.3
wget https://github.com/enigmampc/EnigmaBlockchain/releases/download/v0.0.3/enigma-blockchain_0.0.3_amd64.deb
sudo dpkg -i enigma-blockchain_0.0.3_amd64.deb

# install liblz4-tool to extract the quicksync archive
# install pv to get a progress bar for the extraction process
sudo apt install -y liblz4-tool pv

# extract quicksync into ~/.enigmad/data
# this took around 3-4 minutes for me (for .tar.lz4 file of 5.95 GiB)
pv enigma-1-block868000.tar.lz4 | lz4 -d | tar -C ~/.enigmad -x

# enable v0.0.3 on startup and start the node
sudo systemctl enable enigma-node
sudo systemctl start enigma-node

# see the catching up process until what was block ~872000 (took around 2 minutes for me)
watch -d 'enigmacli status | jq .sync_info'
```

---

<div class="post-metadata">

**Author:** ![tor](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.scrt.network/tor/32/503_2.png) [@tor](https://forum.scrt.network/u/tor)\
**Post date:** [April 13, 2020, 2:54pm UTC](https://forum.scrt.network/t/chainofsecrets-org-launches-quicksync/1467/7 "2020-04-13T14:54:41Z")

</div>

Success here as well 🙂 Thanks @dbriggsie!

---

<div class="post-metadata">

**Author:** ![dbriggsie](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.scrt.network/dbriggsie/32/587_2.png) [@dbriggsie](https://forum.scrt.network/u/dbriggsie)\
**Post date:** [April 21, 2020, 6:49pm UTC](https://forum.scrt.network/t/chainofsecrets-org-launches-quicksync/1467/8 "2020-04-21T18:49:01Z")

</div>

Updated Quicksync to block 992,500 ! (I know i should have waited for 1Million) 😃

[http://quicksync.chainofsecrets.org/enigma-1-block992500.tar.lz4](http://quicksync.chainofsecrets.org/enigma-1-block992500.tar.lz4)

---

<div class="post-metadata">

**Author:** ![dbriggsie](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.scrt.network/dbriggsie/32/587_2.png) [@dbriggsie](https://forum.scrt.network/u/dbriggsie)\
**Post date:** [May 24, 2020, 3:42pm UTC](https://forum.scrt.network/t/chainofsecrets-org-launches-quicksync/1467/9 "2020-05-24T15:42:24Z")

</div>

[Chain of Secrets](https://www.chainofsecrets.org) Team has updated the latest QuickSync to block 1,455,901! - Compressing 16GB into 9GB.

Available here:  
[http://quicksync.chainofsecrets.org/enigma-1-block1455901.tar.lz4](http://quicksync.chainofsecrets.org/enigma-1-block1455901.tar.lz4)
